Company news

The most complete E-liquid DIY Strategy in History

If you have not yet DIY E-liquid, then you need the following ingredients VG vegetable glycerin (Vegetable Glycerin), PG propylene glycol (Propylene Glycol), essence (TFA essence, Cabella essence, FW essence, The best solution is 36mg, etc.) and nicotine solution (Siwei essence, etc.) and nicotine solution are the best. The above four are the basic raw materials of smoke oil, which is basically enough. There are also auxiliary additives, which will be explained below. Tools require needles, eyedroppers, measuring cups, containers, mixers, smoke bottles, etc. 

The most complete E-liquid DIY Strategy in History

VG,PG, Flavor and nicotine 

Before DIY smoke oil, you need understand some basical knowledge, first understand the role of VG PG, VG is mainly to provide smoke, PG is dissolved essence, the ratio of the two according to individual needs. Commonly used 80PV/20VG 70PG/30VG 60PG/40VG 50VG/50PG 40VG/60PG 70VG/30PG. 

In practice, the proportion is not so strict. The general proportion of flavor use is 10%. Because everyone tastes different, so DIY smoke oil is to adjust according to their own taste, this is also the goal of DIY smoke oil-to find their own taste. The general ratio fluctuates between 5% and 15%. Where there is a formula, it shall be formulated in accordance with the proportion of the formula. The addition amount of nicotine is determined according to the concentration of nicotine solution, the target concentration of smoke oil and the total amount of smoke oil. 

For example, if you use a PG nicotine solution with a concentration of 36mg and 30 milliliters of smoke oil with a concentration of 6mg, you need 5 milliliters of nicotine solution. The calculation method is as follows: the total amount of nicotine in 30 ml 6mg smoke oil is 180 mg, divided by the concentration of nicotine solution is 36 mg, the nicotine solution is 5 ml. www.flavoursogood.com It is important to understand that nicotine concentration refers to the amount of nicotine per milliliter of liquid. 6mg means that 1 milliliter of smoke oil contains 6mg nicotine. If you see clearly, it will be very helpful for DIY smoke oil in the future, of course, you can always use a lot of nicotine calculators to calculate. 


Placement order of bituminous oil raw materials. 

Generally speaking, the essence is first fused with PG, then VG, is added and finally nicotine and other additives are added. When you provision, you can add it according to your own habits. 

The most complete E-liquid DIY Strategy in History

What is the concentration of smoke oil? 

The concentration of electronic cigarette oil refers to the content of nicotine in electronic cigarette oil. The concentration of general smoke oil is 0 mg. Low 6mg, medium 12mg, high 18mg such as 6mg smoke oil, refers to 1 milliliter of smoke oil contains 6mg nicotine. In other words, the content of nicotine in smoke oil is based on the amount of nicotine per milliliter. Understanding this concept is the basis of smoke oil distribution. 


Can pure VG be mixed with smoke oil? 

In theory, yes, but some flavors, such as mint, are insoluble in VG, which requires the addition of a small amount of PG to dissolve. www.flavoursogood.com  Pure VG smoke oil can be matched, which takes a period of time to wake up the oil. The smoke oil of pure VG may appear turbid, which is a normal phenomenon. It is suggested that the mixed base solution of PG and VG should be used in the blending of smoke oil. 

The most complete E-liquid DIY Strategy in History

Do you want to wake up with smoke oil? 

Oil awakening is a process, a process in which the essence and the base liquid are fully integrated. It is usually placed in the shade for a period of time, in the middle of the cover can be opened to contact with the air. Many people also use warm water, microwave and so on to speed up oil awakening, we can try, steam decryption advocates natural oil awakening, good things. Wake up oil is a more subjective behavior in DIY smoke oil, everyone has different methods. 


Why does my smoke oil taste tasteless? 

First of all, everyone feels different about taste. Some people are sensitive, some people are not sensitive, and some taste is small. If your oil has just been matched, please wake up for a period of time. If you wake up, the taste is light. You can check the atomizer or formula ratio. As long as the essence is added, the smoke oil can not be tasteless, but there is a thick and light problem. You can try a variety of atomizers. If it still doesn't work, let's change it for a change.


Why is the smoke oil bitter? 

Some players say that the matching smoke oil will have a bitter taste. This problem may be caused in many ways. First, the proportion of PG is too high, because PG itself will be a little bitter. When the smoke oil is just ready, it will not be fully integrated with the essence glycerin, and it will show bitter taste. Second, some flavors will give some people the illusion that they vary from person to person and feel bitter. There are also flavors that are a little bitter in themselves. Third, their own reasons, the mouth is bitter everyone has had. 

The most complete E-liquid DIY Strategy in History

Why doesn't the smoke oil hit the roar? 

The sense of roar varies from person to person. First, you have to make sure that the proportion of nicotine is not wrong, and second, whether the smoke oil is mixed evenly. If you still feel no roar, try a little more nicotine. The nicotine concentration of each smoke oil manufacturer is different, the same 6mg concentration, different smoke oil is also slightly different, sometimes very different. Encounter this kind of situation, can only grope slowly, find their own sense of roar. 


Can I smoke directly after matching the smoke oil? 

After the smoke oil is matched, you can smoke, but if you like to wake up the oil friends, you can wake up the oil and then smoke, wake up oil can let the smoke oil fully blend. Some flavors are not fully integrated when they are just matched with smoke oil, and there is no taste in smoking. So wait for the oil to wake up. It depends on your personal habits and the taste of the smoke oil. 


Where can I put the smoke oil when it is ready? 

This question has already been mentioned in the wake-up section, and I would like to mention it again here. After the smoke oil is matched, you can put it in a large container, a plastic bottle or a glass bottle. If someone cares about a plastic bottle, you can buy a jar or any glass bottle, seal it and keep it in a safe place from the light. Let it slowly make a wonderful change. Be careful to avoid exposure to children.  Any one need E-liquid flavour can contact us!

The most complete E-liquid DIY Strategy in History

DIY vape juice additive

The effect of throat moisturizer is to make the smoke oil more supple and protect the throat. After the addition of high concentration of smoke oil, it can alleviate the stimulation of nicotine. Generally, it can be done by adding a few drops to 10 milliliters. Some customers have a remarkable effect. In general, there is a sweetener in the foreign smoke oil, dissolved in PG, or alcohol, added to the fruit flavor of the smoke oil, to increase the flavor, sweetness, the general fruit beverage will be added. The amount of sweetening agent is very small, and the official recommended dosage is 0.5g 1KG, which can mainly remove the sweetness of smoke oil. Acetyl Pyrazine 2-acetylpyrazide smoke flavor contains only one of many foreign self-made smoke oil raw materials to increase the taste of tobacco. Add the dosage as needed. Tobacco aromatic oil, natural tobacco extract, added to tobacco oil to increase the simulation of tobacco flavor. Like tobacco flavor can be added, the dosage is generally 1% coolant like cool taste but do not want to be covered by mint taste friends can try, the general cold taste of smoke oil to add. Food pigment to see the colorful smoke oil, you may think that smoke oil is this color, in fact, the addition of pigment, this oneself can also DIY.